-
van der waals interactions between silica spheres and metallic thin films created by e-beam evaporation
جزئیات بیشتر مقاله- تاریخ ارائه: 1392/07/24
- تاریخ انتشار در تی پی بین: 1392/07/24
- تعداد بازدید: 1067
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
the long-range and adhesion forces between a molecularly smooth silica sphere and a relatively smooth thin metallic film have been measured by atomic force microscopy (afm) operating in contact mode. the majority of the dispersion force measurements have been done with root mean square (rms) roughness of more than 10 nm. this paper investigates lower roughness to prove or disprove theory of the van der waals force for irregularly distributed size of asperities. metallic films of cu, al, and ag were obtained by coating silicon wafers using an electron beam evaporation (e-beam) method. the e-beam deposition rates were within the range of 0.6–1.2 å/s at vacuum pressures between 2 × 10−6 and 3 × 10−6 mbar. the developed coatings had peak-to-peak distance ranges of 80–120 nm and 1–2 μm. long-range attractive forces were obtained from the extending portion of the force/distance curves measured between a silica particle attached to the afm cantilever and the metallic film surface. certain samples demonstrated an attractive force much larger than the theoretically calculated dispersion force, which we attribute to an electrostatic image force. for other samples, the extending curves were comparable with the theoretical dispersion forces, especially when the curves were shifted by a distance of 1.82 rms. adhesion forces were measured from the retracting portion of the force/distance curves. for peak-to-peak distance near 90 nm, films having an rms roughness of 0.5–3 nm displayed a force reduced by a factor of 3–40 from that predicted by theory. this effect of the surface roughness supports a dmt model for sample interaction at a single contact point after particle detachment. we also demonstrate the absence of any capillary forces under relative humidities up to 40%. it was explained by the thickness of wetting film smaller than the peaks height.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی تاثیر مسئولیت اجتماعی شرکت بر عملکرد با تاکید بر نقش میانجی مدیریت منابع انسانی سبز در صنعت هتل داری
-
مطالعه ویژگی ها قوس بحرانی و رخدادهای پس از انهدام قوس پایدار در مصالح دانه ای به کمک دستگاه توسعه یافته دریچه
-
اصول و معیارهای طراحی معماری سبز با تاکید بر تکنولوژی بام سبز
-
بررسی آزمایشگاهی تعیین فرسایش پذیری سوسپانسیون ها، جهت تزریق در سازه های هیدرولیکی
-
ارزیابی شش مولفه ای رکورد زلزله های نزدیک گسل
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
مقایسه تمایزیافتگی خود در نوجوانان با ساختارخانوادگی تک والد (والد-مادر) و خانواده هسته ای
-
ارتقا هویت یابی سازمانی از طریق برندسازی کارفرمایی (مورد مطالعه: شرکت کیسون)
-
بررسی سیر تاریخی شناخت علمی ادیان و پیدایش علم ملل و نحل در تاریخ و تمدن اسلامی برای همزیستی مسالمت آمیز
-
ارزیابی مؤلفه های تأثیرگذار بر جذب مشتریان و تمایل آن ها به خرید با تأثیرپذیری از سطح قدرت اجتماعی برند
-
the study of dissolution boric acid in different temperature conditions, the dft method
سوال خود را در مورد این مقاله مطرح نمایید :